pH Monitoring for Wastewater Treatment

Controller, electrode and installation selection for continuous industrial wastewater pH and ORP measurement.

WASTEWATER PH / ORP MONITORING

Select the measurement point, electrode and controller as one configuration

Start with the liquid and process conditions. Confirm the measurement point, expected range, temperature, pressure, solids, fouling and cleaning access before matching the electrode, installation and controller. Unknown conditions can be marked “to be confirmed” in the configuration request.

pH / ORPContinuous measurement
PH-302Preferred inquiry starting point
PH-303Option when documented functions fit
Application ReviewController, electrode and installation

Choose a controller against the required functions

Use PH-302 as the initial pH/ORP inquiry model. Consider PH-303 only when the project requirements match its documented functions. Final selection still depends on the exact variant, power, control logic, signal needs, electrode and installation.

Model When to consider it Confirm before selection
PH-302 Starting point for wastewater pH/ORP configuration review Variant, power supply, required analogue/digital signals, relay and control logic
PH-303 When its documented pH/ORP functions and single isolated 4–20 mA output fit the project Required signal count, communication/relay needs, range and installation
PHS-3301 When the project needs its documented larger-format display, records or integration functions Exact required functions and electrode compatibility

The controller does not determine chemical compatibility. Match the electrode and mounting assembly to the liquid, temperature, pressure, solids and maintenance plan.

Configure the electrode and installation

Provide the liquid composition and measurement point, such as a balancing tank, reaction tank, final discharge or scrubber. Confirm expected pH or ORP range, temperature, pressure, suspended solids, oil, fluoride, heavy metals, mounting, cable and cleaning access. Select immersion, flow cell, bypass or insertion installation only after the process arrangement is understood.

Electrodes such as TB84H0E, TB84H0W, TB84H1W, TB84H4W, TB84H5W, TB84H7W and TB84R1 are application-dependent options. Fluoride resistance does not imply universal compatibility; confirm complete chemistry and operating conditions.

Connect the measurement to the control system

Confirm whether the project needs 4–20 mA, RS485 Modbus RTU, relay alarm or dosing control. Verify signal mapping, PLC input, Modbus settings and fail-safe behavior against the exact controller documentation. Commission and verify the measurement before enabling automatic dosing.

Information to include in the configuration request

Send the measurement parameter and point, liquid composition, expected range, normal and maximum temperature, pressure, installation, cable length, required signal, communication, relay or dosing logic, quantity and destination. Unknown items may be marked “to be confirmed”.

APPLICATION SELECTION SUPPORT

Request a wastewater pH / ORP configuration

PH-302 is the starting point for review. PH-303 remains an option when its documented functions fit. We will match controller, electrode and installation to the stated conditions.

Discuss Your Application

Request a Quote