Tenber PH-302

PH-302 pH/ORP Controller with RS485 Modbus

PH-302 industrial pH/ORP controller for wastewater and process monitoring with isolated 4–20mA, RS485 Modbus RTU and two relay controls.

PH-302 Industrial pH/ORP Controller
ENGINEER-READY WATER QUALITY INSTRUMENT

Built for continuous process monitoring

PH-302 industrial pH/ORP controller for wastewater and process monitoring with isolated 4–20mA, RS485 Modbus RTU and two relay controls.

Key specifications

Measurement Range -2.00 to 16.00 pH / -2000 to 2000 mV
Communication RS485 Modbus RTU
Relay 5A/250VAC, 5A/30VDC on selected model
APPLICATION-BASED QUOTATION

Need help confirming the right controller and sensor?

For PH-302 inquiries, share the project details below so we can review the configuration before quotation.

    Start with the essentials. Add technical details only if you already have them.

    Add technical details (optional)

    Technical author: Kaiwen Wu, TENBER Technical review: Kaiwen Wu, International Business — scope and model-selection review Last updated: August 27, 2026 Documentation source: current model manual / technical guide and quality documents. Confirm scope for the supplied model.

    Product Overview

    INDUSTRIAL PH / ORP CONTROL

    PH-302 Industrial pH/ORP Controller for Online Monitoring

    The Tenber PH-302 is an industrial pH/ORP controller for continuous monitoring in wastewater treatment, chemical dosing and process-liquid applications. It supports an isolated 4–20 mA output, RS485 Modbus RTU communication and two relay control points. Panel, wall and pipe mounting options help integrators and plant engineers match the controller to the installation.

    Send your liquid conditions, measurement range and control requirements to confirm the suitable PH-302 controller and electrode configuration.

    −2–16 pHpH measuring range
    ±2000 mVORP measuring range
    −10–130°CTemperature range
    RS485Modbus RTU communication

    How to Select the Right Configuration

    Use PH-302 when the documented −2 to +16 pH or ±2000mV ORP range, one isolated 4–20mA output, RS485 Modbus RTU and two relay controls match the project. Send the liquid composition, expected range, temperature, pressure, mounting method, cable length, control logic and quantity so Tenber can confirm the controller and sensor combination before quotation.

    Electroplating pH Monitoring in Hangzhou

    See how Tenber controllers were applied to plating tanks, an acid-mist scrubber and wastewater neutralization with automated chemical dosing.

    Read the project case study →

    Key Functions and Benefits

    pH or ORP measurement

    Select the documented pH or ORP mode and match the electrode and temperature input to the process.

    Analogue and digital signals

    Use the documented isolated 4–20mA output or RS485 Modbus RTU with a compatible receiving system.

    Two relay control points

    Configure the documented relay functions only after the required control logic and external protection are confirmed.

    Verified Technical Specifications

    Measured variablespH or ORP, plus temperature
    pH range−2.00 to +16.00 pH
    ORP range−2000 to +2000 mV
    Resolution0.01 pH / 1 mV / 0.1°C
    Accuracy±0.01 pH / ±1 mV / ±0.2°C
    Temperature inputPt1000 or NTC10K; manual temperature mode documented
    Temperature rangeMeasurement and compensation: −10.0 to +130.0°C
    Analogue outputOne isolated 4–20mA output; max. load 500Ω; accuracy ±0.05mA
    CommunicationRS485 Modbus RTU; 9600 / 19200 / 38400 baud
    Relay contactsTwo relays; 5A at 250VAC or 5A at 30VDC
    Protection and powerIP65; 90–260VAC, 50/60Hz; consumption below 5W
    InstallationPanel, wall or pipe mounting; 92.5 × 92.5mm panel opening; approx. 0.70kg

    Sensor, Range and Compatibility

    Match the sensor or electrode, expected range, temperature, pressure, liquid composition and installation method to the supplied controller. Final compatibility depends on the complete measuring loop.

    Typical Applications

    Water treatment

    Continuous monitoring at a suitable treatment or process-water point after the measuring loop is confirmed.

    Industrial process control

    Transmit the documented measurement to compatible automation, recording or supervisory equipment.

    Project-based integration

    Confirm liquid conditions, range, installation and signals before the controller and sensor are supplied.

    Installation, Commissioning and Maintenance

    Follow the current model-matched English manual for mounting, wiring, commissioning, calibration, cleaning and maintenance. Confirm the supplied variant and isolate power before wiring. Verify output scaling and receiving-system settings before enabling automatic control.

    Model Selection and Inquiry Information

    Include the following information in a quotation request:

    • Measured liquid and application
    • Normal, minimum and maximum measuring range
    • Temperature, pressure and fouling conditions
    • Sensor or electrode, installation method and cable length
    • Required analogue, digital, relay or alarm signals
    • Quantity, destination and commissioning requirements

    Frequently Asked Questions

    How do I confirm whether this model suits my process?

    Send the liquid, range, temperature, pressure, installation and required signals. Tenber will review the complete controller and sensor configuration before quotation.

    Can I use another sensor or controller configuration?

    Do not assume interchangeability. Confirm the sensor, range, temperature input, wiring and supplied model against the current model-matched manual.

    Which document should be followed for installation?

    Use the current English manual linked on this page for the exact model. Request confirmation if the supplied variant or project conditions differ.

    Related Resources and Request for Quotation

    Use the current English manual linked above for installation and commissioning. For model selection or quotation, send the process conditions and required interface details.

    Request a Quote