Service

Practical support from model selection to system integration.

Find the right document or support route

Start with the instrument model and the task below. Use the current model documentation to prepare wiring, calibration or a configuration review.

PH-302 project support

Review the controller information and English manual before confirming the electrode, installation and required signal.

PH-302 specifications and manual

EC-702 project support

Check the measurement range, conductivity cell, temperature input and interface for the proposed application.

EC-702 specifications and manual

Other instruments and documents

Find the available model-specific English documentation, or identify the file needed for your supplied configuration.

Open the manual centre

For selection or quotation, send the application, quantity and destination. For an existing instrument, send its model and the symptom, with wiring and display photos where available. The support checklist below explains what to include.

Practical Technical Support

Support based on the actual process and instrument configuration

Industrial water-quality instruments work as part of a complete measurement loop. The controller, sensor, installation, wiring, calibration and control-system settings all affect the result. Tenber therefore starts technical support by confirming the model and the real operating conditions.

Before Ordering

We review the measured liquid, required range, temperature, pressure, installation method, cable length and output signal. This information is used to check whether the proposed controller and sensor match the project.

During Installation

Available product documentation covers wiring, sensor installation, calibration, output and basic controller settings. For PLC or SCADA projects, confirm the required 4–20mA, relay or RS485 Modbus RTU interface before commissioning.

After Delivery

When a measurement or communication problem occurs, send the model, application, displayed value, calibration result, wiring information and clear photos. These details help us distinguish a configuration issue from a sensor, installation or process problem.

Information required for technical support

Providing complete information reduces repeated questions and helps the issue move forward faster. Please include as many of the following items as possible:

  1. Controller and sensor model numbers
  2. Measured liquid and normal operating conditions
  3. Current display, alarm or communication symptom
  4. Recent calibration values and buffer or reference solution used
  5. Wiring photos and controller setting photos
  6. Output signal, PLC or RS485 information when relevant
  7. Any recent change to the liquid, sensor, cable or installation

Documentation and model-selection assistance

English product information and manuals are available for current supplied models. If the project is still in the selection stage, send the application conditions first. Tenber will check the controller, sensor and signal requirements before preparing a quotation.

Request a Quote