Built for continuous process monitoring
Industrial pH sensor for continuous water-quality monitoring, rated for 0–14 pH, up to 100°C and 3 bar.
Key specifications
Need help confirming the right controller and sensor?
Not sure which controller and sensor fit your process? Send us the liquid, measuring range, temperature, installation method, required output and quantity. We will review the configuration before quotation.
Product Overview
Industrial pH sensor selection for water-treatment systems
Tenber TB84H0 is an industrial pH sensor for continuous process monitoring. Its product marking confirms a 0–14 pH range, temperature capability up to 100°C and pressure rating up to 3 bar.
Sensor, Range and Compatibility
TB84H0 Selection Table
| Check before ordering | TB84H0 reference | Information to confirm |
|---|---|---|
| Measured parameter | pH | Expected normal, minimum and maximum pH |
| pH range | 0–14 pH | Confirm the process stays within the required range |
| Temperature | Up to 100°C | Normal and maximum temperature at the sensor point |
| Pressure | Up to 3 bar | Operating and peak pressure at the mounting point |
| Installation and connection | Confirm before ordering | Thread, cable length, temperature input and controller connection |
For controller selection, compare the PH-303 pH/ORP controller and the sensor and electrode range. For wastewater electrode guidance, see the industrial wastewater pH electrode guide.
Selection Notes
Confirm the liquid composition, expected pH, temperature, pressure, installation thread, cable length and controller connection before ordering.
Typical Applications
Typical Applications
Wastewater Treatment
Continuous pH monitoring in neutralization and treatment processes.
Electroplating
Process pH measurement after confirming chemical compatibility and installation conditions.
Process Water
Online pH monitoring with a compatible Tenber controller.
Installation, Commissioning and Maintenance
Installation, Commissioning and Maintenance
Use fresh buffer solutions and follow the connected controller procedure for calibration. Keep the sensing glass hydrated according to the applicable handling instructions. Inspect deposits, clean with a method compatible with the contamination and recalibrate before returning the sensor to service.
Confirm the exact supplied variant, controller connection, cable and installation accessories before ordering. Maintenance frequency must be based on fouling, calibration checks and site experience.
Model Selection and Inquiry Information
Application and Model Selection
This industrial pH sensor should be selected as part of a complete measuring configuration, not by parameter name alone. Typical areas for technical review include wastewater neutralization, process water and suitable electroplating treatment stages. Final suitability depends on the real liquid and installation conditions.
Information Required Before Selection
Please provide liquid composition, expected pH, temperature, pressure, installation thread, cable length and controller connection. Tenber uses these conditions to review the sensor, controller and installation combination before quotation.
Frequently Asked Questions
Frequently Asked Questions
Can this model be selected from the parameter alone?
No. Review the liquid, range, temperature, pressure, mounting, cable and controller requirements together.
Can it connect to every Tenber controller?
Compatibility depends on the exact controller input, connector, temperature compensation and supplied variant. Confirm the combination before ordering.
What should be included in a quotation request?
Send the model or parameter, application, liquid, range, temperature, pressure, mounting, output or controller requirement, quantity and destination country.
How should the maintenance interval be set?
Use the process conditions, fouling rate, calibration checks and site experience. One interval does not fit every application.
Manuals, Related Products and Request for Quotation
Confirm the complete measuring configuration
Send the liquid, measuring range, temperature, pressure, installation method, output signal and quantity. Tenber will check the controller and sensor combination before quotation.
Related Products and Resources
Compare related instruments and sensors or browse the complete Tenber catalog.
Discuss Your Application
Send the operating conditions so Tenber can review the complete measuring configuration.
Selection flow for TB84H0
Start with industrial pH measurement, then check the complete measuring loop before quotation.
- Define the application and liquid composition.
- Record the normal and maximum value, temperature, pressure and flow conditions.
- Choose the sensor or electrode, installation method, cable and maintenance access together with the controller.
- Confirm the receiving system, including 4–20mA, RS485 Modbus RTU, relay, recorder, PLC or DCS requirements.
- Send the quantity, destination country and current documentation requirement for model review.
Application boundaries
Confirm wetted materials, reference arrangement, temperature, pressure, connector, cable, mounting and controller compatibility for the actual liquid.
Inquiry checklist
Include the liquid, parameter and range, temperature, pressure, installation, sensor or electrode, cable length, output or communication interface, control requirement, quantity and destination country.