Built for continuous process monitoring
Dual-channel online pH/ORP controller with two isolated 4–20mA outputs and RS485 Modbus RTU.
Key specifications
Need help confirming the right controller and sensor?
For POP-3301 inquiries, share the project details below so we can review the configuration before quotation.
Product Overview
Two measurement channels for demanding process monitoring
Tenber POP-3301 provides two pH/ORP measurement channels for wastewater, environmental monitoring, fermentation, food production and industrial process control. The two channels can be configured for pH or ORP according to the application.
Key Functions and Benefits
Two measurement channels
Configure the two documented channels for the required pH or ORP monitoring points.
Dual analogue integration
Transmit both channels through the documented isolated 4–20mA outputs to compatible equipment.
RS485 Modbus RTU
Confirm the receiving system, register mapping and communication settings before wiring.
Verified Technical Specifications
Verified Technical Data
Sensor, Range and Compatibility
Compatible Sensor Options
Select the sensor according to the liquid, range, temperature, pressure and installation method. Tenber will confirm the final controller, connector and temperature-compensation configuration before quotation.
TB84H0Tenber TB84H0W Chemical-Grade pH ElectrodeIndustrial pH channelView sensor details →
TB84H7WTenber TB84H7W HF-Resistant pH SensorHF-resistant pH channelView sensor details →
TB84R1Tenber TB84R1 Industrial ORP SensorIndustrial ORP channelView sensor details →Typical Applications
Water treatment
Continuous monitoring at a suitable treatment or process-water point after the measuring loop is confirmed.
Industrial process control
Transmit the documented measurement to compatible automation, recording or supervisory equipment.
Project-based integration
Confirm liquid conditions, range, installation and signals before the controller and sensor are supplied.
Installation, Commissioning and Maintenance
Follow the current model-matched English manual for mounting, wiring, commissioning, calibration, cleaning and maintenance. Confirm the supplied variant and isolate power before wiring. Verify output scaling and receiving-system settings before enabling automatic control.
Model Selection and Inquiry Information
Include the following information in a quotation request:
- Measured liquid and application
- Normal, minimum and maximum measuring range
- Temperature, pressure and fouling conditions
- Sensor or electrode, installation method and cable length
- Required analogue, digital, relay or alarm signals
- Quantity, destination and commissioning requirements
Frequently Asked Questions
How do I confirm whether this model suits my process?
Send the liquid, range, temperature, pressure, installation and required signals. Tenber will review the complete controller and sensor configuration before quotation.
Can I use another sensor or controller configuration?
Do not assume interchangeability. Confirm the sensor, range, temperature input, wiring and supplied model against the current model-matched manual.
Which document should be followed for installation?
Use the current English manual linked on this page for the exact model. Request confirmation if the supplied variant or project conditions differ.
Related Resources and Request for Quotation
Use the current English manual linked above for installation and commissioning. For model selection or quotation, send the process conditions and required interface details.