Product Overview
Industrial pH sensor for continuous water-quality monitoring, rated for 0–14 pH, up to 100°C and 3 bar.
Technical Specifications
Process pH measurement for water-treatment systems
Tenber TB84H0 is an industrial pH sensor for continuous process monitoring. Its product marking confirms a 0–14 pH range, temperature capability up to 100°C and pressure rating up to 3 bar.
Typical Applications
Wastewater Treatment
Continuous pH monitoring in neutralization and treatment processes.
Electroplating
Process pH measurement after confirming chemical compatibility and installation conditions.
Process Water
Online pH monitoring with a compatible Tenber controller.
Selection Notes
Confirm the liquid composition, expected pH, temperature, pressure, installation thread, cable length and controller connection before ordering.
Confirm the complete measuring configuration
Send the liquid, measuring range, temperature, pressure, installation method, output signal and quantity. Tenber will check the controller and sensor combination before quotation.
Application and Model Selection
This industrial pH sensor should be selected as part of a complete measuring configuration, not by parameter name alone. Typical areas for technical review include wastewater neutralization, process water and suitable electroplating treatment stages. Final suitability depends on the real liquid and installation conditions.
Information Required Before Selection
Please provide liquid composition, expected pH, temperature, pressure, installation thread, cable length and controller connection. Tenber uses these conditions to review the sensor, controller and installation combination before quotation.
Installation, Commissioning and Maintenance
Use fresh buffer solutions and follow the connected controller procedure for calibration. Keep the sensing glass hydrated according to the applicable handling instructions. Inspect deposits, clean with a method compatible with the contamination and recalibrate before returning the sensor to service.
Confirm the exact supplied variant, controller connection, cable and installation accessories before ordering. Maintenance frequency must be based on fouling, calibration checks and site experience.
Frequently Asked Questions
Can this model be selected from the parameter alone?
No. Review the liquid, range, temperature, pressure, mounting, cable and controller requirements together.
Can it connect to every Tenber controller?
Compatibility depends on the exact controller input, connector, temperature compensation and supplied variant. Confirm the combination before ordering.
What should be included in a quotation request?
Send the model or parameter, application, liquid, range, temperature, pressure, mounting, output or controller requirement, quantity and destination country.
How should the maintenance interval be set?
Use the process conditions, fouling rate, calibration checks and site experience. One interval does not fit every application.
Related Products and Resources
Compare related instruments and sensors or browse the complete Tenber catalog.
Discuss Your Application
Send the operating conditions so Tenber can review the complete measuring configuration.