Built for continuous process monitoring
Membrane dissolved oxygen sensor for continuous water-treatment and aeration monitoring.
Key specifications
Need help confirming the right controller and sensor?
Not sure which controller and sensor fit your process? Send us the liquid, measuring range, temperature, installation method, required output and quantity. We will review the configuration before quotation.
Product Overview
Continuous DO measurement for aeration and water treatment
Tenber TB75D1W is a membrane dissolved oxygen sensor for suitable wastewater, aeration and process-water applications. The controller, cable, installation and maintenance arrangement should be confirmed for the project.
Sensor, Range and Compatibility
Selection Notes
Confirm the liquid, expected dissolved oxygen range, temperature, pressure, installation position, cable length and maintenance conditions.
Typical Applications
Typical Applications
Wastewater Aeration
Continuous dissolved oxygen monitoring in biological treatment tanks.
Water Treatment
DO measurement in suitable treatment and process-water systems.
Controller Integration
Use with a compatible Tenber dissolved oxygen controller.
Installation, Commissioning and Maintenance
Installation, Commissioning and Maintenance
A membrane sensor requires planned inspection and maintenance. Check the membrane condition, avoid damage and keep the measuring area appropriately exposed to the sample. After maintenance or commissioning, allow the system to stabilize and complete the controller calibration procedure.
Confirm the exact supplied variant, controller connection, cable and installation accessories before ordering. Maintenance frequency must be based on fouling, calibration checks and site experience.
Model Selection and Inquiry Information
Application and Model Selection
This membrane dissolved-oxygen sensor should be selected as part of a complete measuring configuration, not by parameter name alone. Typical areas for technical review include wastewater aeration, biological treatment and suitable process-water monitoring. Final suitability depends on the real liquid and installation conditions.
Information Required Before Selection
Please provide expected dissolved-oxygen range, temperature, pressure, installation position, cable length, flow, fouling and maintenance access. Tenber uses these conditions to review the sensor, controller and installation combination before quotation.
Frequently Asked Questions
Frequently Asked Questions
Can this model be selected from the parameter alone?
No. Review the liquid, range, temperature, pressure, mounting, cable and controller requirements together.
Can it connect to every Tenber controller?
Compatibility depends on the exact controller input, connector, temperature compensation and supplied variant. Confirm the combination before ordering.
What should be included in a quotation request?
Send the model or parameter, application, liquid, range, temperature, pressure, mounting, output or controller requirement, quantity and destination country.
How should the maintenance interval be set?
Use the process conditions, fouling rate, calibration checks and site experience. One interval does not fit every application.
Manuals, Related Products and Request for Quotation
Confirm the complete measuring configuration
Send the liquid, measuring range, temperature, pressure, installation method, output signal and quantity. Tenber will check the controller and sensor combination before quotation.
Related Products and Resources
Compare related instruments and sensors or browse the complete Tenber catalog.
Discuss Your Application
Send the operating conditions so Tenber can review the complete measuring configuration.
Selection flow for TB75D1W
Start with membrane dissolved oxygen measurement, then check the complete measuring loop before quotation.
- Define the application and liquid composition.
- Record the normal and maximum value, temperature, pressure and flow conditions.
- Choose the sensor or electrode, installation method, cable and maintenance access together with the controller.
- Confirm the receiving system, including 4–20mA, RS485 Modbus RTU, relay, recorder, PLC or DCS requirements.
- Send the quantity, destination country and current documentation requirement for model review.
Application boundaries
Confirm membrane and electrolyte maintenance, range, pressure or depth, flow, temperature, cable and controller compatibility for the installation.
Inquiry checklist
Include the liquid, parameter and range, temperature, pressure, installation, sensor or electrode, cable length, output or communication interface, control requirement, quantity and destination country.