Built for continuous process monitoring
Industrial ion controller with selectable ppm ranges, dual isolated 4–20mA outputs and RS485 Modbus RTU.
Key specifications
Need help confirming the right controller and sensor?
For ION-8301 inquiries, share the project details below so we can review the configuration before quotation.
Product Overview
Continuous ion monitoring with application-matched electrodes
Tenber ION-8301 is designed for continuous ion and temperature measurement in wastewater and environmental monitoring. It connects to compatible ion-selective electrodes selected for the target ion and actual process conditions.
Key Functions and Benefits
Selectable concentration ranges
Choose the documented ppm range for the target ion and expected process concentration.
Dual isolated 4–20mA outputs
Map the two analogue channels to compatible monitoring or control equipment.
Ion-selective electrode matching
Confirm target ion, interfering ions, pH, temperature and sample condition before selection.
Verified Technical Specifications
Verified Technical Data
Sensor, Range and Compatibility
Electrode Selection
The target ion, expected concentration range, interfering ions, pH, temperature and sample condition must be confirmed before selecting an ion-selective electrode.
Typical Applications
Water treatment
Continuous monitoring at a suitable treatment or process-water point after the measuring loop is confirmed.
Industrial process control
Transmit the documented measurement to compatible automation, recording or supervisory equipment.
Project-based integration
Confirm liquid conditions, range, installation and signals before the controller and sensor are supplied.
Installation, Commissioning and Maintenance
Follow the current model-matched English manual for mounting, wiring, commissioning, calibration, cleaning and maintenance. Confirm the supplied variant and isolate power before wiring. Verify output scaling and receiving-system settings before enabling automatic control.
Model Selection and Inquiry Information
Include the following information in a quotation request:
- Measured liquid and application
- Normal, minimum and maximum measuring range
- Temperature, pressure and fouling conditions
- Sensor or electrode, installation method and cable length
- Required analogue, digital, relay or alarm signals
- Quantity, destination and commissioning requirements
Frequently Asked Questions
How do I confirm whether this model suits my process?
Send the liquid, range, temperature, pressure, installation and required signals. Tenber will review the complete controller and sensor configuration before quotation.
Can I use another sensor or controller configuration?
Do not assume interchangeability. Confirm the sensor, range, temperature input, wiring and supplied model against the current model-matched manual.
Which document should be followed for installation?
Use the current English manual linked on this page for the exact model. Request confirmation if the supplied variant or project conditions differ.
Related Resources and Request for Quotation
Use the current English manual linked above for installation and commissioning. For model selection or quotation, send the process conditions and required interface details.