Built for continuous process monitoring
Industrial ORP sensor rated for ±1999 mV, up to 100°C and 3 bar.
Key specifications
Need help confirming the right controller and sensor?
Not sure which controller and sensor fit your process? Send us the liquid, measuring range, temperature, installation method, required output and quantity. We will review the configuration before quotation.
Product Overview
Oxidation-reduction potential measurement for process control
Tenber TB84R1 is an industrial ORP sensor for continuous water-quality and chemical-process monitoring. Its product marking confirms a ±1999 mV range, temperature capability up to 100°C and pressure rating up to 3 bar.
Sensor, Range and Compatibility
Selection Notes
Confirm the liquid, expected ORP, chemical composition, temperature, pressure, installation method, cable length and controller connection.
Typical Applications
Typical Applications
Electroplating Wastewater
ORP monitoring in suitable oxidation, reduction and treatment processes.
Disinfection Control
Continuous ORP observation where it is appropriate for the process.
Industrial Water
Online measurement with a compatible Tenber pH/ORP controller.
Installation, Commissioning and Maintenance
Installation, Commissioning and Maintenance
ORP indicates the oxidation-reduction condition of the process; it is not a direct concentration measurement. Inspect the sensing surface for coating, use an appropriate ORP reference solution for checks and confirm the control setpoint through the actual process requirement.
Confirm the exact supplied variant, controller connection, cable and installation accessories before ordering. Maintenance frequency must be based on fouling, calibration checks and site experience.
Model Selection and Inquiry Information
Application and Model Selection
This industrial ORP sensor should be selected as part of a complete measuring configuration, not by parameter name alone. Typical areas for technical review include electroplating wastewater, oxidation-reduction processes, disinfection monitoring and industrial water treatment. Final suitability depends on the real liquid and installation conditions.
Information Required Before Selection
Please provide expected ORP, oxidants or reductants, liquid composition, temperature, pressure, mounting, cable length and controller connection. Tenber uses these conditions to review the sensor, controller and installation combination before quotation.
Frequently Asked Questions
Frequently Asked Questions
Can this model be selected from the parameter alone?
No. Review the liquid, range, temperature, pressure, mounting, cable and controller requirements together.
Can it connect to every Tenber controller?
Compatibility depends on the exact controller input, connector, temperature compensation and supplied variant. Confirm the combination before ordering.
What should be included in a quotation request?
Send the model or parameter, application, liquid, range, temperature, pressure, mounting, output or controller requirement, quantity and destination country.
How should the maintenance interval be set?
Use the process conditions, fouling rate, calibration checks and site experience. One interval does not fit every application.
Manuals, Related Products and Request for Quotation
Confirm the complete measuring configuration
Send the liquid, measuring range, temperature, pressure, installation method, output signal and quantity. Tenber will check the controller and sensor combination before quotation.
Related Products and Resources
Compare related instruments and sensors or browse the complete Tenber catalog.
Discuss Your Application
Send the operating conditions so Tenber can review the complete measuring configuration.
Selection flow for TB84R1
Start with industrial ORP measurement, then check the complete measuring loop before quotation.
- Define the application and liquid composition.
- Record the normal and maximum value, temperature, pressure and flow conditions.
- Choose the sensor or electrode, installation method, cable and maintenance access together with the controller.
- Confirm the receiving system, including 4–20mA, RS485 Modbus RTU, relay, recorder, PLC or DCS requirements.
- Send the quantity, destination country and current documentation requirement for model review.
Application boundaries
Confirm the ORP electrode materials, reference arrangement, temperature, pressure, cable, mounting and controller input for the process.
Inquiry checklist
Include the liquid, parameter and range, temperature, pressure, installation, sensor or electrode, cable length, output or communication interface, control requirement, quantity and destination country.